We support 3-axis and 5-axis-indexed machining, accommodating approach vectors for complex geometry from any angle.
26” x 18” x 5”
660.4mm x 457.2mm x 127mm
16” x 16” x 5”
406.4mm x 406.4mm x 127mm
0.15″ x 0.15″ x 0.15″
3.81mm x 3.81mm x 3.81mm
± 0.005″ [± 0.13mm]
± 0.008″ [± 0.2mm]
Tighter tolerances to ± 0.001″ [± 0.03mm] available, depending on part geometry.
Holes with diameters as small as 0.020″ [0.51mm].
Features with radii as small as 0.032″ [0.81mm].
We support turning of outside and inside features.
Ø 3” x 12” or Ø 6” x 9”
Ø 76.2mm x 304.8mm or
Ø 152.4mm x 228.6mm
Ø 0.125” x 0.625”
Ø 3.175mm x 15.875mm
± 0.005″ [± 0.13mm]
± 0.008″ [± 0.2mm]
Tighter tolerances to ± 0.0005″ [± 0.01mm] available, depending on part geometry.
Holes with diameters as small as 0.020” [0.51mm]
We support grooves on inside and outside diameters down to 0.020″ [0.5mm] width.
Most coarse and fine metric, inch, and some NPT thread sizes are supported. We will add thread relief grooves as required for manufacturing, for example when threading to a shoulder.
We offer a wide range of finishes and secondary operations, including: